Tips on mounting the lower (short) injectors - 3.2 FSI VR6

Alles um den VR-Motor (2.3 bis 3.6 und mehr).
Antworten
mawrick
Fußgänger
Fußgänger
Beiträge: 11
Registriert: 25.06.2024, 16:01

Tips on mounting the lower (short) injectors - 3.2 FSI VR6

Beitrag von mawrick »

Anyone know if it's best to install the injectors 1 by 1 and then the rail into the injectors, or fit them to the rail first and install ?.


Also should I be using o-ring grease on the rail side, or should those also be "dry fit", as the injector seals ?.
Benutzeravatar
AAA-Cabrio
VR6-Chefmechaniker
VR6-Chefmechaniker
Beiträge: 1491
Registriert: 30.04.2007, 21:40

Re: Tips on mounting the lower (short) injectors - 3.2 FSI VR6

Beitrag von AAA-Cabrio »

To the rail First…
mawrick
Fußgänger
Fußgänger
Beiträge: 11
Registriert: 25.06.2024, 16:01

Re: Tips on mounting the lower (short) injectors - 3.2 FSI VR6

Beitrag von mawrick »

AAA-Cabrio hat geschrieben: 02.07.2024, 18:51 To the rail First…

thnx, any idea about o-ring grease or just dry fit em like the teflon-nylon?-seal ?
Ottscheck
Fußgänger
Fußgänger
Beiträge: 1
Registriert: 11.05.2023, 19:21

Re: Tips on mounting the lower (short) injectors - 3.2 FSI VR6

Beitrag von Ottscheck »

I used grease for the rubber seals on my 6 injectors and they are still tight today.
Antworten