Exhaust Cam shaft adjuster (Nockenwellenversteller) - anyone able to confirm if normal movement? (3.2 AXZ VR6)

Alles um den VR-Motor (2.3 bis 3.6 und mehr).
Antworten
mawrick
Fußgänger
Fußgänger
Beiträge: 13
Registriert: 25.06.2024, 16:01

Exhaust Cam shaft adjuster (Nockenwellenversteller) - anyone able to confirm if normal movement? (3.2 AXZ VR6)

Beitrag von mawrick »

Currently doing the chains on my 06 Passat V6 with the 3.2 VR6 (code: AXZ) engine.

Can anyone confirm the movement of this exhaust cam adjuster is "normal" in the "locked" position, or should it be 100% "stuck".

two videos showing it in the engine and out of the engine:






kinda seem like it will go a bit towards exhaust side again when in car, but this is the movement distance of it.


If someone have a video of a new one that shows the same that would also be of interest.

If I need a new one can I use from a R36 instead ?.

Sorry for english, but my german is sadly very lacking :)
Benutzeravatar
Masel
Polofahrer
Polofahrer
Beiträge: 212
Registriert: 17.09.2011, 17:57

Re: Exhaust Cam shaft adjuster (Nockenwellenversteller) - anyone able to confirm if normal movement? (3.2 AXZ VR6)

Beitrag von Masel »

Hello, this movement is normal
mawrick
Fußgänger
Fußgänger
Beiträge: 13
Registriert: 25.06.2024, 16:01

Re: Exhaust Cam shaft adjuster (Nockenwellenversteller) - anyone able to confirm if normal movement? (3.2 AXZ VR6)

Beitrag von mawrick »

Thanks for feedback, appreciated :)
Antworten
  • Vergleichbare Themen
    Antworten
    Zugriffe
    Letzter Beitrag